降低水性涂料成膜温度方法探讨

水性涂料已在不同领域得到越来越广泛的应用,但存在成膜温度高,冬季难以成膜的问题。从水性漆成膜机理出发,探讨了乳液的合成及水性涂料配方对水性漆最低成膜温度的影响。重点讨论了乳液颗粒结构和成膜助剂对最低成膜温度的影响。     

硼对第二代镍基单晶高温合金显微组织的影响

硼(B)是强化镍基单晶合金小角度晶界的重要微量元素,但目前关于B对镍基单晶合金显微组织影响的系统报道非常有限。通过对3种不同B含量(质量分数分别为0、0.01%、0.02%)的第二代镍基单晶合金DD11铸态及热处理态组织定量表征,研究了B对相转变温度、(γ+γ′)共晶组织、硼化物的影响。结果表明:B显著降低合金的固液相线,提高铸态共晶组织体积分数;0.01%B的加入,合金中未出现M3B2型硼化物相;而0.02%B的加入,显著促进了骨架状硼化物的形成,降低合金初熔点,引起残余共晶含量的大幅度提高;骨架状硼化物吸收较多的Cr、Mo和W等元素,降低合金的固溶强化效果,可导致单晶合金基体的蠕变性能大幅度降低。研究结果对认识单晶合金中微量元素B的作用机理及优化B成分范围具有理论指导意义。     

Microhabitat selection in the sand recluse spider (Sicarius thomisoides): the effect of rock size and temperature

In spiders, temperature is considered an important environmental variable for microhabitat selection. In this study, we evaluated the effect of temperature and rock size on the presence of the sand recluse spider Sicarius thomisoides and the degree of selectivity in different locations. This species is a large spider that lives under rocks in desert and semi-desert climates and is particularly active during the summer. In Chile, these spiders can be found at both coastal and inland locations under different thermal conditions, where usually the temperatures are lower near the coast. If large-scale climatic conditions are important for this species, they may be expected to select lower rock temperatures on the coast than at inland locations. In addition, we would expect that the spiders would choose larger rocks in inland compared to coast locations, which reduce the effect of high temperatures. We found that the probability of finding individuals of this species increased according to rock temperature and rock size in the field. Our results suggest that S. thomisoides prefers larger and warmer rocks to shelter under during the day, this selectivity being similar at both coastal and inland locations. Thus, this species tends to select rocks with the same thermal and structural conditions, independent of the climatic conditions.     

稀土Ho3＋/Yb3＋共掺SrBi4Ti4O15高温铁电陶瓷的上转换发光及其温度传感特性

Sr Bi4Ti4O15是一种具有高居里温度（Tc）、高机械品质因数和大电阻率的铋层状结构铁电、压电多功能材料,通过掺入稀土离子的手段,可使其具有上转换发光的特性,并且可以在一定程度上改善其电学性能.在本文中,同时将Ho3＋和Yb3＋对A位的Bi进行取代,其中Ho3＋的取代量为0.06 mol-1,Yb3＋的取代范围为0≤x≤0.3,采用传统的固相烧结法制备了Sr Bi3.94-xHo0.06YbxTi4O15陶瓷.主要通过控制Ho3＋离子的量不变,调节Yb3＋离子的浓度来研究不同稀土离子掺杂量对Sr Bi4Ti4O15陶瓷的形貌、上转换发光特性、以及介电性能的影响.在使用980 nm的红外激光器对Sr Bi3.94-xHo0.06YbxTi4O15陶瓷进行激发下,从上转换发光图谱中可以观察到三个峰,分别为峰位在547 nm附近较强的绿色发光、659附近以及759 nm处的较弱的红色发光.同时可以看到,随着Yb3＋浓度的增加,绿色上转换发光的强度表现出先增强,后减弱的规律,且当Yb3＋取代量为x=0.15时,绿色上转换发光强度达到最大值.通过研究上转换发光强度与激发光功率的关系得到,绿色和红色上转换发光均为双光子吸收过程.在研究Sr Bi3.79Ho0.06Yb0.15Ti4O15样品上转换发光与温度的关系时,可以观测到随着温度的增加,547 nm处的绿色上转换发光和659 nm处的红色上转换发光的强度均随之减弱,且I659 nm与I547 nm的荧光强度比与温度存在线性关系,利用这种温度与上转换发光强度的关系,可将Sr Bi3.94-xHo0.06YbxTi4O15陶瓷应用于光学温度传感器.     

高温时H13钢中初生碳氮化物的分解研究

利用光学显微镜、扫描电镜和电子探针研究了H13钢中初生碳氮化物高温分解时的形貌、尺寸、成分变化规律.原始初生碳氮化物主要为10~30μm的长条状(Vx,Mo1-x)(Cy,N1-y)及少量方形的(Tix,V1-x)(Cy,N1-y).在1200℃保温2.5 h后碳氮化物边缘变为凹凸不平的锯齿状,然后形成细小的分解颗粒,10 h后碳氮化物平均长度减小为12.9μm,主要为(Tix,V1-x)(Cy,N1-y).当经过1250℃ ×5 h保温后87%的碳氮化物发生分解,(Vx,Mo1-x)(Cy,N1-y)溶解消失,碳氮化物长度在20μm以下,当保温时间延长到10 h后碳氮化物长度均在10μm以下,70%为方形并且93%分解形成细小颗粒,未分解的碳氮化物为(Tix,V1-x)(Cy,N1-y).电子探针分析(Tix,V1-x)(Cy,N1-y)的分解与Fe元素扩散有关,高温时Fe在(Tix,V1-x)(Cy,N1-y)中含量逐渐增加而Ti、V减少,优先在边部曲率半径较小部位或缺陷处分解,形成0.1~1μm的细小分解颗粒,并由外向内以区域溶解方式使原始碳氮化物逐渐消失.双亚点阵模型分析两种碳氮化物的平衡溶解温度和组成有关,试样中大部分(Tix,V1-x)(Cy,N1-y)平衡溶解温度在1200~1246℃之间,与实验吻合较好.     

电伴热系统的应用与管道温度偏差的控制研究

郑西客运专线西安北站房工程的大部分管道处于室外或半室外空间,在冬季会有冻裂的危险。而电伴热方法可补充管道的热量损失,维持管道的温度,使得管道的温度偏差不会超过规定值,从而避免了管道的冻裂。阐述了电伴热系统的工作原理与特点,介绍了伴热电缆的施工技术。     

综合物探方法在煤矿火烧区探测中的应用

煤层在燃烧过程中,煤层上覆岩石受到高温烘烤,在磁性、导电性和温度等方面物理性质发生显著的变化,为磁法、自然电位法、测温法提供了理论基础。通过实例来说明综合物探方法对确定火烧区范围的有效性,并可优势互补、互相验证,提高物探解释精度。     

Amplitudes, rates, periodicities and causes of temperature variations in the past 2485 years and future trends over the central-eastern Tibetan Plateau

Amplitudes, rates, periodicities, causes and future trends of temperature variations based on tree rings for the past 2485 years on the central-eastern Tibetan Plateau were analyzed. The results showed that extreme climatic events on the Plateau, such as the Medieval Warm Period, Little Ice Age and 20th Century Warming appeared synchronously with those in other places worldwide. The largest amplitude and rate of temperature change occurred during the Eastern Jin Event (343-425 AD), and not in the late 20th century. There were significant cycles of 1324 a, 800 a, 199 a, 110 a and 2-3 a in the 2485-year temperature series. The 1324 a, 800 a, 199 a and 110 a cycles are associated with solar activity, which greatly affects the Earth surface temperature. The long-term trends (>1000 a) of temperature were controlled by the millennium-scale cycle, and amplitudes were dominated by multi-century cycles. Moreover, cold intervals corresponded to sunspot minimums. The prediction indicated that the temperature will decrease in the future until to 2068 AD and then increase again.     

Vegetation effects on mean daily maximum and minimum surface air temperatures over China

Changes in the daily maximum (Tmax) and minimum (Tmin) surface air temperatures and the associated temperature extremes have severe consequences on human society and the natural environment. In this study, we assess vegetation effects on mean Tmax and Tmin over China by computing a vegetation feedback parameter using the satellite-sensed Normalized Difference Vegetation Index (NDVI) and observed temperatures for the period 1982–2002. In all seasons, vegetation exerts a much stronger forcing on Tmax than on Tmin, and thus has a substantial effect on the diurnal temperature range (DTR) over China. Significant positive feedbacks on Tmax and the DTR occupy many areas of China with the feedback parameters exceeding 1°C (0.1 NDVI)–1, while significant negative effects only appear over the summertime climatic and ecological transition zone of northern China and some other isolated areas. Also, the vegetation feedbacks are found to vary with season. In areas where significant feedbacks occur, vegetation contributes to typically 10%–30% of the total variances in Tmax, Tmin, and the DTR. These findings suggest that vegetation memory offers the potential for improving monthly-to-seasonal forecasting of Tmax and Tmin, and the associated temperature extremes over China. Meanwhile, the limitations and uncertainties of the study should be recognized.     

Magnetocaloric effect in Er-Al-Co bulk metallic glasses

A series of Er-Al-Co bulk metallic glasses (BMGs) have been prepared by the copper mold casting method. The glass forming ability and magnetocaloric effect (MCE) for these alloys have been investigated. The second-order magnetic transition from para-magnetic to ferromagnetic states takes place at about 9 K. These BMGs exhibit excellent MCE because of their large effective magneton number; Er56Al24Co20 BMG has a maximum entropy change and refrigeration capacity of 16.06 J kg-1 K-1 and 546 J kg-1,respectively...